MSI GE62 Apache Pro 004 Speakers Replacement

Written By: Majid Al Hashmi
  • Comments: 0
MSI GE62 Apache Pro 004 Speakers Replacement

Difficulty

Moderate

Steps

5

Time Required

15 - 20 minutes

Introduction

This guide will show how to replace the speakers on the MSI Apache Pro 004 laptop.

  1. VrmK6rcAvhQa1YJJ

    • Start with the bottom of the laptop facing up.

  2. NycatHDJJLWqP66X
    NycatHDJJLWqP66X
    KCSglUYRMRDsWs52

    • Remove the 15 screws from the bottom of the laptop with a PH1 screwdriver.

    • Remove the bottom plate

    • Keep track of all the screws and which slot they came from, as they slightly differ. We recommend this system: lay out on a piece of paper and pretending the paper is the device. Place the screws on the paper approximately where they would go

  3. qAj1pPlDDiRKVqMR
    qAj1pPlDDiRKVqMR
    I6vR212yFcG1Pabl
    5HjShsZMGeY6By6e

    • Remove the screw holding down the battery with a PH1 screwdriver.

    • Pull out the battery.

  4. Ebg6kGIflHVCQWbp
    Ebg6kGIflHVCQWbp
    AwXg1kFgDKbY2yrM
    OLcmdA5JeS41gNDg

    • Remove the four screws, two on each speaker, with a PH1 screwdriver.

  5. JkjSURp111ePKCkL
    JkjSURp111ePKCkL
    bxU6PlVSGbBl3FnM

    • Gently pull back the speakers until they release from their socket.

    • Keep track of which speaker went where. The connectors for the speakers are unique; you cannot use a speaker that should go on the right side on the left side and vice versa.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Majid Al Hashmi

Member since: 13/02/18

283 Reputation

0 comments