Introduction
- Device name: MECHREVO Z2
- The purpose of this guide is to replace the RAM of your laptop.
- If your MECHREVO Z2 Laptop gets slow in use, you may need to replace or add RAM to your Laptop.
- Please disconnect the power supply before working.
- RAM
Tools
-
-
Open the retaining latches on either side of the RAM card with your fingers or plastic tool.
-
Remove the RAM.
-
-
-
Align the notched part of the RAM with the raised part of the card slot.
-
Push inward until the notch and bulge coincide.
-
Press the other end of RAM down with your finger.
-
Conclusion
要放大说明您的设备,请进行这些操作。
2 comments
Where can I find support for my mechrevo z2-g series gk5cp6z?
here is the link: