Lower Cable Shield

Written By: Chayton Ritter
  • Comments: 2
Lower Cable Shield

Difficulty

Moderate

Steps

2

Time Required

No estimate

Introduction

This is a prerequisite-only guide! This guide is part of another procedure and is not meant to be used alone.

  1. KrdjGIhaDutm4BLD
    KrdjGIhaDutm4BLD
    rqRXkXVFYNGuMqfN

    • Use a Phillips screwdriver to remove the five screws securing the lower cable shield to the logic board:

    • Two 2.0 mm screws

    • Three 1.3 mm screws

  2. ayiAkOBcA4M3MQZO

    • Use tweezers or your fingers to grab and remove the lower cable shield.

    missing battery disconnect

    CPR Princeton -

    Just to affirm the other comment.

    You need to unscrew the battery connection and insert a battery separator. I think the iFixit separator is too big. Very thin plastic can work in a pinch.

    gatewaynomad -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Chayton Ritter

Member since: 21/08/20

20864 Reputation

0 comments