Logitech Webcam Pro 9000 Front and Back Cover Replacement

Written By: Timothy Forrest
  • Comments: 0
Logitech Webcam Pro 9000 Front and Back Cover Replacement

Difficulty

Easy

Steps

2

Time Required

5 minutes

Introduction

Learn how to get to the interior of a Logitech Webcam Pro 9000. There are a few extra wires, so be careful not to pull the covers apart too quickly.

  1. AeyHbr6H4nTMxf6O
    AeyHbr6H4nTMxf6O
    DhnZHIrmxAVHryCX

    • Remove the two 8 mm Phillips #0 screws on the back cover.

    • The motherboard connects the two covers together. DO NOT separate the two yet.

    • There is a button that loosens as the Phillips screws are removed. Don't be alarmed if it falls out.

  2. bRSDmuJFSaSPpcbC
    bRSDmuJFSaSPpcbC
    CyuYqB4l6O2RlZXR

    • Remove the four 6mm Phillips #0 screws connecting the motherboard and front cover.

    • DO NOT detach the wire connecting the motherboard to the front cover.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Timothy Forrest

Member since: 18/04/13

19 Reputation

0 comments