Logitech Harmony 950 Battery Replacement

Written By: Blake Sanborn
  • Comments: 3
Logitech Harmony 950 Battery Replacement

Difficulty

Very easy

Steps

4

Time Required

5 minutes

Introduction

If the battery to the remote is not working properly, follow this guide to replace it.

  1. g5rMpp3DNYwoLE5Z
    g5rMpp3DNYwoLE5Z
    Q3h2JciWDBpl3ale

    • Make sure the remote control is powered off before starting.

    • Use the Opening Tool to open the port cover at the bottom of the remote control.

    • Bend the cover back to gain easy access to the screws.

  2. hSbdJAyVGFFLAUby
    hSbdJAyVGFFLAUby
    ZsCqQB1C2YfYLpSj
    RSSDGHUDlnIEQlsE

    • Use the Phillips #0 Screwdriver to remove the (2) two 6mm screws.

    • Pull the bottom cover off of the remote control.

  3. S1GW5RZSBvejdaNQ
    S1GW5RZSBvejdaNQ
    C5TFEMLAPxyqlXVo
    THEUfdZWljQTXFSC

    • Use the Phillips #1 Screwdriver to remove the (2) two 6mm screws.

    • There should be a gap on each side to fit the Opening Tool. Use the Opening Tool to open the back cover (Soft Touch cover) using the gap.

  4. wRAYOGbaQAYKVw4e
    wRAYOGbaQAYKVw4e
    6iKpuT6cQCgC2HnD
    LxxxEGLAfhGSVDLt

    • Use the Opening Tool to lift the battery out of the case.

    • Gently pull the cable out of the socket to unplug the battery.

    • Be careful not to damage any part of the remote when pulling the cable out.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Blake Sanborn

Member since: 26/09/17

561 Reputation

3 comments

And where to buy these batteries?

Rene A -

Still no batteries for this unit? Maybe Amazon?

Dan -

|Just checked, and batteries are available on Amazon from several vendors. Mine is on its last legs, so I have ordered one.

Mac Samildanach -