Introduction

This is a guide for the removal of the touchpad in the Lenovo Touch Y70-70. The steps below will show a step by step process of how to take the laptop apart in a reasonable amount of time and also put it back together. The touchpad might need to be replaced in case of damage in the form of a scratch.

  1. aGvXnfupDZ5p4Xxi
    • Flip the device so that the back cover is facing you.

    • Using the Phillips #0 screwdriver, remove 14 screws from the back of the device.

  2. SNdDBU2rIBpFYt2v
    SNdDBU2rIBpFYt2v
    Ph2JDovOtMWFANID
    oQj3uiTKuVVDCRvs
    • Using the Phillips #0 screwdriver, remove the three screws holding down the battery.

  3. YyT5QAZLREWFLEux
    YyT5QAZLREWFLEux
    OcUH1IfjrCL2onfV
    • Using the Phillips #0 screwdriver, remove the metal reinforcement by removing the three screws.

  4. chALqubKaFiiUcWB
    • Detach the cable connecting the touchpad to the motherboard.

  5. uwOIrKQR6Akd3PJb
    uwOIrKQR6Akd3PJb
    DIx65FAdKOcQCDKK
    1o6ZQP5mCKWh2MQL
    • Using the Phillips #0 screwdriver, remove the three screws holding down the touchpad.

    • Using the spudger, remove the touchpad from the laptop.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Mohammed Motorwala

Member since: 07/11/19

298 Reputation

0 comments