Leader Impression i10A-LE Microphone Replacement

Written By: riley seyffert
  • Comments: 0
Leader Impression i10A-LE Microphone Replacement

Difficulty

Moderate

Steps

3

Time Required

No estimate

Introduction

Removing and replacing the microphone for the Leader Impression i10A-LE.

  1. VPt2StiYgFQEaXKn

    • Orient your Leader Impression i10A-LE with the word "Impression" closest to you and the camera in the top left corner.

  2. XAlLpQjhuHpRNwKf
    XAlLpQjhuHpRNwKf
    urTK1LiovIYbqoLx
    E15JpVtGbUPD6mVm

    • Pry the back off by using plastic opening tools.

    • Using the plastic tools slide the flat end into the device.

    • Gently pry the back piece until you hear a popping noise.

    • Once the back is loose, remove it from the device and set aside.

  3. PKcrsgejqHFopaGD
    PKcrsgejqHFopaGD
    wZYcvOQBB5X4QQAG

    • Disconnect the positive and negative battery leads.

    • Remove the microphone from plastic housing with the tweezers.

    • Desolder the positive (red) and negative (black) power leads.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

riley seyffert

Member since: 12/09/16

201 Reputation

0 comments