Introduction
The back of this monitor is held on with plastic clips. Before disassembly it is difficult to know where the clips are and what parts come off.
-
-
Back panel is held on with 30 plastic clips. The clip locations are circled in red.
-
10 across the bottom. The clip sticks out from the black frame into the white back.
-
8 across the top. The clip faces towards the center of the monitor. The clip sticks out from the white back into the black frame,
-
6 along left and right side. The clip faces towards the center of the monitor. The clip sticks out from the white back into the black frame.
-
There is a single screw near the HDMI connector
-
Use a thin metal tool (jimmy) to slide between the white back and black frame to release the clips.
-
To reassemble your device, follow these instructions in reverse order.
