Introduction
Basic guide. These instructions are part of another set of instructions and are not intended to be used independently.
Intermediate step for C E F models.
-
-
The instructions apply to almost all devices from Jura and similar devices from AEG, Krups. The success of the repair is striking!
-
The picture shows the old grind stones on the left and the new ones on the right. They consist of a grinding ring and a grinding cone.
-
For this repair, the side parts do not necessarily have to be removed.
-
-
-
Pull the grinder adjuster up. Note the setting, it is best to take a photo of it.
-
The screws that hold the coffee container are located in two recesses. First clean, then loosen. The protective cover over the grinder does not need to be removed.
-
Follow the steps in reverse order to reassemble your device
