Insignia Sport NS-4V17 Battery Replacement

Written By: David Poltorak
  • Comments: 0
Insignia Sport NS-4V17 Battery Replacement

Difficulty

Moderate

Steps

4

Time Required

No estimate

Introduction

Does your device not turn on or does the power run out quickly? It is probably the result of a dysfunctional battery. This guide will show you how to remove your battery for a replacement. Be aware that this guide has some steps that can possibly damage the device.

  1. K1dmC3otkZUZBDr1

    • Remove the 3mm Phillips #00 screw on the back of the Insignia NS-4v17.

  2. rpyUV3IKjGDIFY4b
    rpyUV3IKjGDIFY4b
    JZQC6KJK34Z2J6KN

    • Detach the back cover by carefully pulling up and out on the back plastic casing.

    • Do not pull apart the red wire connecting the battery to the device.

  3. CNbC1vhlSoVFGNcB

    • Use the plastic opening tool to reach underneath the battery, opposite from the side with the red wire, and remove it from its plastic case.

    • Be careful to not tear the wires while opening the case.

  4. B4313FegaHq1YEeB

    • Reach under the white plastic wire connector using the plastic opening tool and disconnect it from the socket.

    • Do not disconnect wires from plastic connector.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

David Poltorak

Member since: 18/04/13

4 Reputation

0 comments