India Mark III Chain Replacement

Written By: Andrew Optimus Goldheart
  • Comments: 0
India Mark III Chain Replacement

Difficulty

Moderate

Steps

8

Time Required

No estimate

Introduction

Prereq only.

  1. ZLyVQlSriGIPKxlb
    ZLyVQlSriGIPKxlb
    cE4kCkHEeyGF2Z33
    dFnMSifarrKBA2Py

    • Place the spacer collar around the pump rod below the raised chain, with the beveled side down, and the flat side facing up.

  2. jmjPoMTClufyYHRg
    jmjPoMTClufyYHRg
    ilaDGuKR5gNU4oXh
    otydbJoQoRkXb2Eb

    • The following procedure requires two people. If you attempt to do this alone, you risk injuring yourself and damaging the pump.

    • Lift the pump handle until the base of the chain comes to rest on the spacer collar, and the chain is slack. Hold the handle in this position while the chain is being detached.

  3. nganIEDqQwYTW1bG
    nganIEDqQwYTW1bG
    fDEoPsAF4IGJN1hN
    UOEYfclHQGql4MKv

    • Using the two access holes, place an angled socket wrench on the bolt and nut attaching the chain to the pump handle.

  4. wMxHBO5NN4iLT6W2
    wMxHBO5NN4iLT6W2
    yt3EcteQG1QO5x6M
    yWTHPjfWm1A5blFC

    • Hold the wrench on the bolt stationary.

    • Loosen the nut.

  5. BbMrLL1NYZ1Py1OV
    BbMrLL1NYZ1Py1OV
    rGRfQYBIxUvRieBY
    CL2VfUlxpEkiFZ4a

    • Remove the nut from the chain bolt.

  6. L2PxN3LCJESbIObN
    L2PxN3LCJESbIObN
    xsjVCgKRRRdTMRDR

    • Remove the washer from the chain bolt.

  7. NqcotAWFnyxiFXwx
    NqcotAWFnyxiFXwx
    h24eMFUR4mQ5JwnC

    • Remove the chain bolt.

  8. tXEBpJUxjYvmSfIq
    tXEBpJUxjYvmSfIq
    eYRLASOYRcjpDlvp
    udcSSChydYn2GRbd

    • Pull the top of the chain straight off of the pump handle.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Andrew Optimus Goldheart

Member since: 17/10/09

505446 Reputation

0 comments