Introduction
It may come in handy to know how to replace or remove an illuminated light switch. It is a simple and quick process but there are some safety measures you must follow through with. Dealing with electricity is no joke so you will need to make sure to follow all the steps correctly including to turn off your circuit breaker and light switch before beginning any repairs. Use this guide to replace your light switch.
-
-
Remove the screws using a Phillips screwdriver to dismount the switch from the wall.
-
Use a circuit tester to test and make sure that the power is off. Use both ends of the circuit tester and go into the side of the switch into the wall. Connect the pointed ends of the tester and touch them to the screws attached to the side of the switch.
-
Remove the switch from the wall.
-
-
-
Use a Phillips screwdriver to remove the screws that are on the side of the light switch.
-
Take the wires right off the screws like so.
-
-
-
With the new light switch, reattach the wires around the screws.
-
You may need to use some wire cutters to tighten the wire around the screw.
-
Use a Phillips screwdriver to tighten the wire around the screws by turning it until you feel it is not loose.
-
-
-
Return the switch back into the wall.
-
Remount the light switch to the wall using a Phillips screwdriver.
-
-
-
Turn back on the power.
-
Make sure the power is on; there should be an orange faint light coming from the switch like you see in the photo.
-
-
-
Screw back on the cover with either a flathead or a Phillips screwdriver.
-
Your replacement is all finished!
-
