Introduction

This guide will show you how to reattach the legs of an Ikea RESGODS model bed tray or serving tray. The frequent use of a bed tray can loosen the screws or, in my case, the screws are totally detached from the legs. Replacing a bed tray can cost as much as twenty-dollars to forty-dollars, depending on the brand. This guide will show the detailed steps to fix the RESGODS bed tray from Ikea.

  1. ljygZWnBNRtVKu3S
    ljygZWnBNRtVKu3S
    PYEnlUePLIMHFAN2
    • Carefully place the bed tray face down on an even surface.

    • Avoid working on a table or surface that you wouldn't want to get scratched. While the repair is safe, you could inadvertently scratch the tabletop.

  2. T1HCP1hqmpqeM24I
    T1HCP1hqmpqeM24I
    QN5VDTSWFQMJMMVL
    • Identify which screw is loose or which leg is detached.

    • Lift the bed tray leg by two millimeters.

  3. dlmxdCSVmKeLSZDZ
    dlmxdCSVmKeLSZDZ
    x3SOJmL5CliPEbOQ
    RNBYwJWmoGZSSkZx
    • Insert the 1/2 inch truss head screw inside the leg hole.

  4. lox4nhfp4m66EYho
    lox4nhfp4m66EYho
    TPkORp1Fk3VTKu5E
    RVoIerqKBcvpQOLM
    • Slide two steel flat washers onto the screw.

  5. B14sYPiOfbJKDC26
    B14sYPiOfbJKDC26
    so5UylohYUaDUOm2
    QDc6uRubxtiebORA
    • Attach the leg to the hole with the screw and steel flat washers.

  6. bH6pfpsb1xefusin
    bH6pfpsb1xefusin
    ILvhpkfYlfH5DrOT
    gNyQ4cFFJ64baoGs
    • Use a Phillips #00 screwdriver to secure the screw to the tray.

Conclusion

In conclusion, this guide is generally easy. You will just need the right screws and steel flat washer to fix it.

Erik Francisco

Member since: 13/01/24

133 Reputation

0 comments