Ikea PLUTTIS Battery Replacement

Written By: Yusuf
  • Comments: 0
Ikea PLUTTIS Battery Replacement

Difficulty

Easy

Steps

6

Time Required

4 minutes

Introduction

If your Ikea PLUTTIS Clock is low on battery, or slow and it needs a change. With the help of this guide, you can fix your Clock and get it back in working order by replacing the battery.

  1. ljUxLKxyVA2PQpdn

    • Set the clock face down.

  2. GMVSEHnEDumhu4OG
    GMVSEHnEDumhu4OG
    bPtdYWjeBLDjFQq2
    tGkGKhZmfC3YTEH6

    • Take out the dead battery from the back of the Ikea PLUTTIS clock.

  3. tD3VuJ2MCBYGAXSm

    • Get the new battery that you want to use to replace the dead battery.

    • Use an AA type battery.

  4. TZG2cZmEcWQfdGcM

    • To place the battery properly locate the positive and negative indicators on your clock.

  5. 1tOZpeSOZFjI2S6D
    1tOZpeSOZFjI2S6D
    UmuUfsfMExAdqHSk

    • Using your fingers, insert the negative side of the battery into the back of the clock and push it in.

    • Avoid pushing too hard, it could potentially break the spring holding the battery.

  6. SssYBAyVA2GUrDGm
    SssYBAyVA2GUrDGm
    fxVXaKPbJ25nKuVP
    RgdAQrBD2iTwiVfT

    • Push down on the positive side of the battery into the clock.

    • If you hear a clicking noise when pushing down on the battery. it means the battery has successfully been placed in.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Yusuf

Member since: 01/02/23

210 Reputation

0 comments