Hyggly Percussive Massage Gun Battery Replacement

Written By: Raj Patel
  • Comments: 0
Hyggly Percussive Massage Gun Battery Replacement

Difficulty

Moderate

Steps

9

Time Required

30 - 40 minutes

Introduction

Is your massage gun not turning on? It probably means that the battery has reached the end of its usage. This is a guide will show you how to replace the battery of your Hyggly percussive massage gun.

  1. 1p4vIjo2NcMsZNlx

    • Remove the 4 rubber stoppers on the massage gun.

    • You can use tweezers for ease or take the hard way and use your screwdriver.

  2. DQVbMIS6Uy4at2jw
    DQVbMIS6Uy4at2jw
    CBc6GS5rCDS1Rqtv

    • Using the Phillips #00 screwdriver, unscrew the 1 Phillips head screw underneath the power button.

    • Using the Phillips #00 screwdriver, unscrew the 4 Phillips head screws under the rubber stopper.

  3. 3Z2AAOa3UsBLvcvm
    3Z2AAOa3UsBLvcvm
    6gZSkhiMFxhYW12R

    • Twist and remove the circular black lid that houses the main circuit board.

    • Pull apart the main body of the massage gun. The gun should now be in three parts.

    • Detach the wires connected to the main circuit board.

    • Remember to write down which wire attaches where.

  4. JecH3TcT3PjIehQq
    JecH3TcT3PjIehQq
    O2XAEIqvPQUj1qIL

    • Using the Phillips #00 screwdriver, unscrew the 4 Phillips head screws inside the main body of the massage gun.

    • Pry open the lid once the screws are removed.

  5. jKRVohmVI5u5nhJL
    jKRVohmVI5u5nhJL
    BTZEhnUr3hHvLSaK

    • Remove the top cover from battery compartment.

    • Remove the rubber sleeve off the battery compartment.

  6. HZDTiVPvf2qJCDhc
    HZDTiVPvf2qJCDhc
    DkN3V2ysQ2MypJNe

    • Remove the sticker off the bottom of the battery compartment near the power switch.

    • Using the Phillips #00 screwdriver, unscrew the 3 Phillips head screws around the power switch to access the inside of the battery compartment.

  7. W2wHUcfGYwuAKvIU

    • Remove the bottom lid of the battery compartment to reveal the second circuit board.

    • Detach the wires of the battery from the circuit board.

    • Remember to write down the positioning of the wires.

  8. BCkYI11t3RZ2vryB

    • Pry open the battery compartment

  9. 1RRAuEEIyKmv5xle
    1RRAuEEIyKmv5xle
    W3OIAfl5DCdREKmT

    • Remove the old battery to replace the new one.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Raj Patel

Member since: 15/09/23

169 Reputation

0 comments