Introduction
Do you have an acoustic guitar that needs to be restrung? Follow the steps to restring your instrument and make it sound brand new again.
Tools
Parts
-
-
Twist the 6 knobs in appropriate directions to unstring the guitar.
-
In order to unstring the strings, turn the knobs for E(low), A, and D strings in clockwise direction and turn the knobs for G, B, E(high) strings in counter clock wise direction.
-
-
-
Take the new strings out of of the package.
-
Pin the stings onto the bridge, into the pinholes from left to right in the following order; E(low)-A-D-G-B-E(high).
-
-
-
Insert the end of each string into the head machine.
-
Leave about 1 to 2 inches of string from the head machine and cut it using a clipper.
-
-
-
Guide the string through the pin hole, so that about 1/3 of an inch of excess string comes out from behind the pin.
-
Turn the knobs in a counterclockwise direction for E(low), A, D strings.
-
Turn the knobs in a clockwise direction for G, B, E(high) strings.
-
-
-
Clip the tuner on the head of the guitar and turn it on.
-
Tune each string by plucking the string and checking the letter musical note indicated on the tuner.
-
To reassemble your device, follow these instructions in reverse order.
2 comments
Great to know the restring process for acoustic guitar. I am searching for such type of a blog since I need to replace the old string of my guitar and install new strings. The steps mentioned here are very much clear what to do and anyone can easily understand what he/she has to do. I have gone through all the steps and I hope that with the help of these steps I can also able to replace with my newly purchased(https://faberusa.com/product-category/tu... tuner buttons.
Thanks! I have found this very helpful. But still the fear of replacing the guitar strings is still there lol.