Introduction

This guide show a tip to chemically clean up a battery leakage whit common home products.

  1. kCfml6mjdEVIKCiX
    kCfml6mjdEVIKCiX
    KNECEE6X65bVofrD
    ZQBCmRRyCwjFAcWl
    • Open the keyboard by removing 11 small Philips screws.

    • When opening a keyboard always open it whit the keys sides turned down. Because if you open it with the keys turned up depending on the keyboard model the keys will fall off.

  2. BYHwMtPr455lMHwx
    BYHwMtPr455lMHwx
    j6ZmOmKZJqusRZQJ
    6kNAqUfJl4D5YmDa
    • Just a detail of the keyboard circuit.

    • You dont need to mess up here unless the battery acids reached the circuit area.

    • If the circuit is contaminated with acids or corrosion. Just clean it whit isopropyl alcohol and a tooth brush.

  3. lui2JhOcCXJHbTGD
    lui2JhOcCXJHbTGD
    1ZFTZww3gkNcDKEU
    • Celan the batery slot whit isopropyl alcohol and tooth brush.

    • Brush it until it became clean and use a piece of old cloth the dry the e excess of alcohol.

  4. qjFVIcQvYmEoFPdv
    qjFVIcQvYmEoFPdv
    mpJtIh3tqFyHoxSZ
    btE3GH5IfulMVaJA
    • Completely remove the power cable.

    • You will clean it using a homemade chemical solution composed of vinegar and salt. The same solution used to clean old coins.

    • On a mall cup of tea add vinegar until it almost fill up and add a small tea spoon of salt and mix it up until the salt dissolve.

    • Drop the contained metallic part inside the solution and wait for about 10 minutes.

    • Remove it and check if the corrosion was removed. If not repeat the process for more 10 minutes. Dot not forget the metal inside the solution for a time longer than10 minutes or the solution will star to corrode the metal and make things worse.

    • Finish it by cleaning it with a tooth brush and alcohol isopropyl.

    • Before clean.

    • After clean

Vinicius Rodrigues Bellini

Member since: 12/12/22

1046 Reputation

0 comments