Introduction

  1. ZCIsAV4WPXmgmktY
    ZCIsAV4WPXmgmktY
    HPbJZF5mxyn2TeBA
    ZsNRHDqcJkCs4YDX
    • Open the tray by pressing the eject button

    • Remove the DVD tray faceplate by pushing the faceplate up off of the tray.

    Very Super service!

    SzibeL -

  2. OhLfcEahRNRIDn51
    • Press the eject button to insert the tray

    • After the tray is closed unplug DVD player

  3. 3Gm6fLxyZlhTGRNP
    • Unscrew the 3 screws in the back.

  4. SW5ITatQiYCsgODf
    SW5ITatQiYCsgODf
    KRBJbDRAqwIeyLvJ
    • Pull the outer case upward and then towards you.

  5. yhImEwi64cWAvTcX
    yhImEwi64cWAvTcX
    XmffFGKMgNpWmmsD
    uRVEc6MxPyseBgMR
    • There are six symmetrically placed tabs holding in the front faceplate. Unhook these six tabs to loosen the faceplate.

  6. idZPysyJia43cHCw
    idZPysyJia43cHCw
    DYEE4F5JDaMnHKZu
    • Pull off front faceplate. This may take a couple of tries to get all six tabs unhooked simultaneously.

  7. E3Hyp3mvyGRtjHX6
    E3Hyp3mvyGRtjHX6
    p1lmMGXefh2jgTfA
    eQVKoAbrnmpUEPBf
    • Locate the white clip that attaches the cord to the motherboard

    • Grasp clip and squeeze to release

    • Lift up and remove power cord

    • Slide cord mount from outer case

  8. Zqo2U6YZFnoSBkwZ
    Zqo2U6YZFnoSBkwZ
    AhncmkQq5nmeDTnw
    mBKRtc2D2KhIIsZC
    • Remove the three screws holding in the DVD tray

  9. DqYtpU6jdfhrunSe
    DqYtpU6jdfhrunSe
    LKaoBLQFTdxUwCqn
    • Remove the power cord and first two ribbons by pulling them directly out of their sockets.

  10. D3YTSktepbNhirB2
    D3YTSktepbNhirB2
    Ax41HKhvA4ISKRSN
    • Gently lift the DVD tray off of the motherboard.

  11. dT4P6AQketdaerDv
    • Use the tweezers to make sure all the buttons aren't stuck.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Mitchell Hart

Member since: 21/01/11

903 Reputation

0 comments