How to Restore a Dented Hydro Flask

Written By: Madelyn
  • Comments: 1
How to Restore a Dented Hydro Flask

Difficulty

Very easy

Steps

6

Time Required

10 - 20 minutes

Introduction

Use this guide to fix a dent in your Hydro Flask or similar metal water bottle.

A large part of the appeal of Hydro Flasks is the aesthetics. Dents ruin the overall appearance of the bottle, become an eyesore, and can be hard to cover up. Although they are a good alternative to plastic bottle they are not the easiest to maintain as they are easily dented with frequent usage despite their high price tag. Instead of purchasing a new one and discarding the old one, this guide can help you easily restore your bottle to their original shape, saving the environment and your wallet.

This guide will restore dents made on the metal portion of the bottle and not any of the plastic components on the lid. This repair is for aesthetic purpose only and are not effective for repairing the vacuum insulation ability of the bottle if dents damage the interior bottle walls.

  1. qVXZmgeDrm3LGhyT

    • Empty your Hydro Flask water bottle and clean the exterior.

    • You may want to remove stickers around the dent to see the damage more clearly.

  2. 5FOqsNTruB2YZhXk

    • Boil enough water to pour over the dent.

  3. WYmU5sFuAGpZlvpH
    WYmU5sFuAGpZlvpH
    lQh3ZPqD1LKHmkeL

    • Prepare an ice bath by filling a bin with water and ice in a small tub.

  4. ufXFGVvXhMeMZnXD
    ufXFGVvXhMeMZnXD
    dBXP1GevorQgRE4B
    3LKdZjYJ3ppmOWvj

    • Place your Hydro Flask in an empty sink.

    • Pour the boiling water directly onto the dented area for about 10 seconds.

    • Boiling water can cause burns to the skin, protective gloves are suggested.

  5. Y42IsGjxmFeLCYTR

    • Immediately submerge the dented area into the prepared ice bath for about 10 seconds.

    • Handle the bottle with caution as it may still be hot from the previous step. Use protective gloves as suggested.

  6. XhI3QbUUQFWovdq2

    • Use a wooden spoon to reach inside the Hydro Flask and push out the dent.

    • Any solid object long enough to reach the dent will also work.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Madelyn

Member since: 27/01/23

145 Reputation

One comment

Ma con una borraccia termica(quindi a doppia parete) come si può fare?

Francesca Basile -