Introduction

Use this guide to re-install Kitchen-Art Non-Stick Pot lid.

It is important that the pot lid is always in a good condition, because if not, it could be too loose to annoy you while you are cooking, or even accidentally totally fall apart. So you definitely need to re-install it after you use it for a period of time.

There isn't any special requirements or hazards. This guide is absolutely newbie-friendly.

  1. jC6J2lEskqpDISP6
    • Clean the components.

  2. XdTqCR5MvEHcyLgV
    XdTqCR5MvEHcyLgV
    tUxf1uM2WBeh3IsC
    noGkgiLEbcedSNZY
    • Insert the screw through the center of the smaller steel bracket.

  3. aFD5sFpPYAjiyyGR
    aFD5sFpPYAjiyyGR
    KRIBlhLKD2N2GFBi
    • Line up the pegs of the handle with the holes in the larger iron bracket.

  4. KHIObOcSO3KZZlUM
    KHIObOcSO3KZZlUM
    iEMEcm5G4iRGuZX4
    pJWJQqDMdDjqBarw
    • Insert the screw with the smaller iron sheet from inside of the lid to outside of the lid

  5. fFBA5fUMUyqsuvgY
    • Insert the screw into the screw hole in the lid.

  6. e2tjQnvxKXKcnMMh
    e2tjQnvxKXKcnMMh
    mOvGNI3VjTaTllVl
    6lVDKQXpmwQh1R6y
    • Slightly turn over the lid to make yourself face to inside of the lid

  7. 3EHcephnQhGYkeEk
    3EHcephnQhGYkeEk
    KOXTVjrDQF3WM2QS
    KOMWXLfaSDWcjgvL
    • Use a screwdriver to tighten the screw.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Zijing Wang

Member since: 11/01/23

169 Reputation

0 comments