Introduction
If the draw cord on your boot is frayed or broken, it's time for a replacement. We will walk you through these simple steps to replace a draw cord, ensuring your boots provide the warmth and support you need!
Tools
Parts
-
-
Make sure the replacement cord is the correct length by laying it alongside the broken cord.
-
Remove the stopper from the broken cord.
-
-
-
Make a loop close to the ending of the draw cord.
-
Take the safety pin, pinch it through the loop and then close it.
-
-
-
Insert the loop together with the safety pin into the tunnel drawstring.
-
Push the safety pin forward inside the drawstring and pull the tunnelling material apart behind the pin.
-
Repeat until you reach the other side of the tunnel and then drag the safety pin out.
-
-
-
Pull out the cord ending until both sides are of equal length and then remove the safety pin.
-
Take the stopper, push the snap button down to open it and then pass the end of the cord through each side.
-
-
-
Tie both ends of the cord together to form a loop, ensuring the stopper remains securely in place.
-
In need of another repair? Don't worry! Check out our other guides to find quick solutions for your favourite clothing, footwear and equipment!
