How to Open the Rocketfish RF-WHTIB-A Receiver

Written By: Caitlin Charlton
  • Comments: 0
How to Open the Rocketfish RF-WHTIB-A Receiver

Difficulty

Easy

Steps

3

Time Required

10 minutes

Introduction

Most technical problems with the Rocketfish RF-WHTIB-A receiver require opening up the device. This guide will show users how to successfully open up their device.

  1. ZrDmPUadBSFjMG1T

    • Remove the 4 rubber tabs on the bottom side of the receiver.

  2. HQSVlElDJP2clWOF

    • Unscrew the four 12 mm screws on the bottom side of the receiver.

    • Use a Phillips #1 screwdriver for this step.

  3. h3KGdYGK5wEjTppr
    h3KGdYGK5wEjTppr
    RrNb4AUgwcsib4dZ

    • Remove top casing from the receiver.

    • The receiver top casing is difficult to remove. Internal clasps may have to be broken in order to remove the top casing (this will not effect the device's function)

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Caitlin Charlton

Member since: 23/03/15

756 Reputation

0 comments