Introduction

No one notices the direction that a clothes dryer door opens until it is a problem. The dryer door swing may need to be reversed depending on what side of the washing machine it sits on, or where it is in a laundry room. Our Fast Fix guide will document the process used to fix the swing direction of an LG DLEX5170W SteamDryer door.

Before you begin, make sure the dryer is unplugged and you are in an open space with sufficient room.

  1. TR6nnwHkOXGCKNuI
    TR6nnwHkOXGCKNuI
    imOTJDQrHwRjqwLk
    UPTLtXWkMfvJZEey
    • Hold the door while removing it from the dryer so that it doesn't fall and break.

    • Remove the two 150 mm Phillips #2 screws from each of the two hinges on the inside of the door.

    • Remove the door.

  2. EdYNNcISUkLbBJXG
    EdYNNcISUkLbBJXG
    5bGCr3TcrCK5S5u1
    wpJK4QP6IgvWAJcf
    • In order to prevent scratching or damage, place the door on a soft or protected surface

    • Remove the sixteen 150 mm Phillips #2 screws from the door.

  3. gaCTRRlJNpnymatT
    gaCTRRlJNpnymatT
    5KqeBbIAHt4KSVwW
    • Gently pry open the inside panel of the door using a spudger or medium flathead screwdriver.

    • Remove the inside panel from the door.

  4. LJR6OJYrPHZwxi2b
    LJR6OJYrPHZwxi2b
    6dwWeyxjmdIwdH5U
    TFBQKmqjVDNfegut
    • Remove the two 140 mm Phillips #2 screws from both the hook and the latch on the inside panel.

    • Swap the positions of the hook and the latch on the door.

    • Reattach the two screws to both the hook and the latch on the inside panel.

  5. 6TxRkigjyRYb4TOr
    6TxRkigjyRYb4TOr
    OMnP6BW33y1LSuTn
    uoJb6xJqjCmjHbOS
    • Remove the two Phillips #2 140mm screws from each of the two hinges.

    • Swap the positions of the two hinges and the two gray cover caps.

    • Reattach the two screws on each of the two hinges.

  6. SYGJmocHkyP6Gfub
    SYGJmocHkyP6Gfub
    ochdcLVErhNihTcw
    Jvruh654CsCWZ1JH
    • Remount the inside door panel to the door.

    • Reattach the sixteen 150 mm Phillips #2 screws to the door.

  7. hEREuaWEngWqdaux
    hEREuaWEngWqdaux
    jUU3dvLZU3iOd1Vd
    KHQeLI5yjJeWvy6G
    • Remove the two plastic cover caps on the dryer front gently, using a spudger or medium flat-head screwdriver.

    • Reattach the two plastic cover caps on the opposite side of the dryer front.

  8. I2qNc5IRMNwteMBR
    I2qNc5IRMNwteMBR
    yLqcwplxL1ajHLh5
    TmyaeASReQoYcKhd
    • Hold the door while reattaching it to the dryer so that it doesn't fall and break.

    • Reattach the door to the dryer using two 150 mm Phillips #2 screws on each of the two hinges.

  9. RqyRTAELHmquZwsa
    RqyRTAELHmquZwsa
    dex6uUPua5lNjY2b
    • Test the alignment and door latch by opening and closing the door.

Conclusion

Reversing the dryer door swing is a simple and quick process. Completing this project can save you time and frustration by allowing your dryer door to open freely in the direction you need.

Lis Cinelli

Member since: 29/09/20

386 Reputation

2 comments

Directions are very clear and accurate. Not difficult!

Colin Ponder -

I looked everywhere for directions on how to reverse the door on my dryer, but couldn't find any. The instructions in the LG manual were useless and there was nothing on YouTube that pertained to my dryer. I was ready to call an appliance repairman and then I found you. Your instructions were easy and very clear. I now have a dryer door that works. Thank you. Thank you.

Bill Ferguson -