How to Fix Scratches on a Steel Watch

Written By: Youssefmo
  • Comments: 1
How to Fix Scratches on a Steel Watch

Difficulty

Easy

Steps

7

Time Required

6 - 7 minutes

Introduction

This guide is most effective for watches that have steel or metal bracelet on it. this repair will mostly include household items, but be prepared to obtain or purchase one or few items if needed. Do not preform this fix on a surface that is prone to water damage. have a great fix!

  1. 2SxJGFDJZVo21bfV

    • Fill any container up with water.

    We have to take hot water

    Adnan -

  2. RSfOdvDpAKqpaocX

    • Grab any soft-bristled brush around for your convenience.

  3. SUYDfShhw3cMcttv
    SUYDfShhw3cMcttv
    P51XeqNCJcLv3rco
    Gsd1MbgdOSAJPDlU

    • Dip the toothbrush in the water.

    • Brush along the crystal, bezel, and case in a circular motion.

    • Brush the bracelet in a linear motion back-and-forth.

    • Make sure to brush over the crevices of the bracelet for an optimal clean.

  4. hqBGFPAoAvOJmsFT

    • Dry the watch with a microfiber towel by pinching your fingers together in a back-and-forth motion.

  5. WLs2YH4RaIwMm4Wf

    • Use the abrasive side of a sponge to brush the watch, following the same steps mentioned in Step 3.

    • Do not brush over the crystal with the sponge.

    • Apply minimal pressure to the sponge when brushing the watch.

  6. PfjOhYYAtHpUEaTg

    • Fold the metal polishing cloth in half.

    • Hold the corner of the cloth along your index finger.

  7. ASxX6ZUWRLqlFYKI

    • Brush off all the scratches on the watch using a back-and-forth motion with great pressure to ensure effectiveness.

    • Perform the process as many times as needed.

    • Do not brush over the crystal.

Author

Youssefmo

Member since: 01/09/22

219 Reputation

0 comments