How to Fix A Warped Frisbee Disc

Written By: Bryce Petersen
  • Comments: 1
How to Fix A Warped Frisbee Disc

Difficulty

Easy

Steps

5

Time Required

1 - 2 hours

Introduction

For frisbee owners, a warped disc is a common problem due to prolonged sun exposure or moderate wear over time. For most discs, this warping can often be undone with some gentle manipulation. This fix involves a simple set up, and then letting the frisbee sit for approximately 1 hour.

  1. LsjGGD5RhyuEF4f6
    LsjGGD5RhyuEF4f6
    BNHP66dfgYXiKTVE

    • Place the frisbee disc on a flat surface with the concave side facing up. Lay a towel down flat over the frisbee.

  2. Ych2nN1YCUM3Id46

    • Take the bowl and fill halfway full with water. Microwave until water is boiling.

    • The bowl will be hot, so handle it with care.

  3. dsypJhZIxXCeyNYE

    • Take the bowl with boiling water and place it on top of the frisbee and the towel.

  4. GxBdfQPRmDeC1Pnk

    • Add a textbook as a weight to sit on top of the bowl.

    • Let everything sit for 1 hour

  5. dVZZdbiFVoXgTSAh

    • Remove any weights, the bowl, and the towel. Check to see if the disc is still warped.

    • If it is still warped repeat this process one more time.

    Don’t use a book you like. IT will inherit the warp due to the hot water.

    kenneth krabat -

Conclusion

The time taken to fix the warping on your frisbee may vary based on how thick the plastic is.

Author

Bryce Petersen

Member since: 10/04/15

164 Reputation

0 comments