How to Buff an Apple Watch

Written By: Goose

Comments: 1

Difficulty

Easy

Steps

Time Required

5 - 8 minutes

Introduction

Bring life back to your Apple Watch with a brand new, out of the box look following these steps. This guide instructs you to remove scratches from the stainless steel casing of an apple watch. It is intended to clean scratches off safely without damaging any sensitive parts.

Parts Needed

1x Pair of rubber gloves

1x Microfiber Cloth

1x Cape Cod Polishing Cloth

Tools

Step 1

Flip the watch over so it is face down.

Step 2

Remove the straps by pressing the button adjacent to each side and sliding the band right out.

Step 3

Clean the watch with a microfiber cloth.
Make sure all smudges are removed at this point.

Step 4

Put on Gloves. Using a polishing cloth, which is already soaked with polishing cream, rub one side of the watch back and forth.
Repeat on each side of the watch.
When using the polishing cloth, do NOT go directly over the microphone or the speaker.
If the polishing cloth begins to turn black while you are wiping, do not be alarmed. The blackness is just layers of dirt coming off the watch.

Step 5

Grab your microfiber cloth and go over the same area that you previously wiped until the residue is gone and you have restored the side to it’s previous mirror finish.
Repeat on each side of the watch.