How To Mount Raptor Hotend PCB On The DDX

Written By: AJ Pereira
  • Comments: 0
How To Mount Raptor Hotend PCB On The DDX

Difficulty

Moderate

Steps

4

Time Required

No estimate

Introduction

  1. dtU5H3LWidCkjfwe

    • Remove the 2 Phillips screws

  2. FGNqwJX4EvFtGwpn

    • Mount the printed PCB Mount with the 2 included M3x25 socket head screws

  3. UG2LrnJs2oZemPoy

    • Attach the PCB with the 4x#4 self-tapping screws

  4. 3xKIKNP2U4oe5HMW
    3xKIKNP2U4oe5HMW
    cxnsu26qbppseOKy

    • Picture 1 is for a Raptor 2. Picture 2 is for a Raptor 1

    • Filament sensor Note Raptor 1 Does not have a Filament sensor

    • Extruder motor

    • BL Touch 3 and 2 Pin connections

    • Hotend Heater Cartridge

    • Thermistor

    • 4010 Hotend Heatsink Fan

    • Cooling Part Fan

Conclusion

Now you can mount your hotend and then mount the whole assembly to the X-carriage plate.

Author

AJ Pereira

Member since: 29/05/20

2689 Reputation

0 comments