Introduction

As you walk through this guide you will successfully achieve your attempt to replace the blade of your 12 inch Holmes table model #32510380. Although a simple repair be aware that this task may take more force than usual to attain your final product.

This link is the manual that helped aid in identifying parts and helped us deconstruct the fan.

12084_12_Table_Fan_IM.pdf (getholmesfans.com)

  1. j3ZXRPOXED2b3UgK
    • Unclip the fan grill from the base.

    • May take some force.

  2. PRirSlxPoZOjUaOR
    • Remove the grill.

  3. M2tKPt2oeJ2dcRqU
    • Unscrew the blade cap.

    • Blade cap is the black disk in the center.

    • Turn to the right for loosening.

  4. EFk3XQDjISRx4f5f
    EFk3XQDjISRx4f5f
    dgYe5EFLQbdJesMH
    • Lift the blade off of the motor shaft.

  5. FdZ6Mw6yxORIeLW6
    • Insert a new blade on the motor shaft.

    • The motor shaft is the long metal screw in the middle.

  6. rItg5GOGl4HkwV4g
    • After the blade is back on, reattach the blade cap.

  7. P1uoRoFNJY1TJEX2
    • Screw the blade cap back on.

    • Turn to the left for tightening.

  8. mHKnfwUuuls3JhYM
    • Clip the fan grill back on the base.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Emily Contreras

Member since: 23/10/23

319 Reputation

0 comments