HP w2216h Power Button Replacement

Written By: Sadeq Taha
  • Comments: 0
HP w2216h Power Button Replacement

Difficulty

Moderate

Steps

3

Time Required

5 minutes

Introduction

Is your monitor not powering on? Is the power button making a weird clicking noise? You might need to replace the power button.

  1. F2VFg3qOXEuoPXiX
    F2VFg3qOXEuoPXiX
    CmZVCKXP1gmLSbyQ
    dU1C3xIbSDTZEMgJ

    • Do not put the metal spudger between the metal and the glass. It needs to go under the bezel and above the metal.

    • Turn monitor so that the screen is facing you.

    • Pry the black bezel from above the metal by placing your metal spudger between the bezel and the metal and twisting the tool slightly.

    • The best places to pry are in the lower left and lower right corners of the black bezel.

  2. UZe1Nbr65vw6NFX2

    • Do not pull the screen away to hard, this could snap the power cable.

    • Remove the power button from the top of the plastic frame.

  3. Tq3KnaIJ4LAav3h6

    • Remove the power cable by carefully sliding it out of it's plug.

    • Check if there is any tear or fray in the cable.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Sadeq Taha

Member since: 25/03/16

219 Reputation

0 comments