Introduction

Use this guide to replace the hard drive for the HP Envy x360 15m-bp112dx. Hard drives are used to store data in the long term on a computer, such as files, photos, and videos. Some reasons to replace the hard drive include upgrading it or the laptop fails to boot up when powering it on.

  1. iYk3hlAmyPkWwkuK
    • Power off the laptop before starting the disassembly.

    • Start by facing the device upside down with the hinge facing away from you.

    • Remove the seven 1 mm Phillips screws.

  2. URyFrJMrHEvoIECB
    URyFrJMrHEvoIECB
    RyCTAVBPfOJNqGJj
    gf5agM1ldCglrCFA
    • Use an opening tool to pry the back panel by pushing the bottom cover upwards.

    • Place the bottom cover away from the laptop.

  3. RLFdAYGX1YVCXmkv
    RLFdAYGX1YVCXmkv
    aMfmHC6rdYCccqor
    XL2uRBnpxvSqbL2X
    • Carefully remove the sata ribbon cable from the hard drive, pulling it out horizontally.

    • To avoid injury, ensure that you disconnect the battery prior to removing any of the cables in the laptop.

  4. krbw6VihFyOwtbQq
    krbw6VihFyOwtbQq
    bYnUfGSY2ooBVoJR
    ulPCkBJAf2nxhRPA
    • Remove the hard drive by pulling it out vertically.

    • Remove the plastic casing around the hard drive by peeling it back.

  5. XPdEQ5j2EWjdpBSY
    XPdEQ5j2EWjdpBSY
    oGqZQbKHeo1XAiHk
    • Disconnect the ribbon cable by pulling it away horizontally from the hard drive.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Mohamed Kozamel

Member since: 20/03/23

121 Reputation

0 comments