HP Envy j-100 RAM Replacement

Written By: TMG
  • Comments: 0
HP Envy j-100 RAM Replacement

Difficulty

Easy

Steps

5

Time Required

1 minute

Introduction

  1. YXEKsXfJ2yYEwK1X

    • Slide the battery clip and remove the battery.

  2. VvWS2qkuJDF4SYTU
    VvWS2qkuJDF4SYTU
    1mHw4xv3StZUNpGJ

    • Unscrew the single access door screw.

    • Pop out the access door to reveal the RAM, wifi card, and hard disks.

  3. kgaIrQPQw1ZL351p
    kgaIrQPQw1ZL351p
    d1JqDriH5n1mOvgB

    • Push the 2 clips out gently to pop the SODIMM up.

    • Pull the SODIMM out of the socket.

  4. iONdaV6nHmfkXoJr

    • Insert as shown in the diagram.

    • Make sure the SODIMM is fully inserted before laying it flat.

    • Make sure its fully inserted, or try a different SODIMM

    • Make sure the ram is DDR3L

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

TMG

Member since: 10/03/22

614 Reputation

0 comments