HP Envy 23-d060qd TouchSmart Speaker Replacement

Written By: Zachary Dicks
  • Comments: 1
HP Envy 23-d060qd TouchSmart Speaker Replacement

Difficulty

Moderate

Steps

7

Time Required

15 minutes

Introduction

My computer won't play audio even though I've checked all of the connections. How can I have a dance party without any audio? Luckily the party starts in 15 minutes so I have time to replace the speakers.

  1. HHdGbQZls1tNliKW

    • Use your hands to unclip the plastic snaps on the back panel of the device.

  2. SeTZ4rGMyEEAMq4g

    • Remove the three 11.5mm PH2 screws from the back panel.

    • The screws will not fall out of the back panel, but they will unscrew to release the back panel.

  3. AoMMpGYbbdpOjF2O

    • Now, take the back panel off by pulling at it gently with your hands.

  4. yut1r3XtjKhWx1XG

    • Remove the receiver for the keyboard and mouse with your hands.

  5. YOkXkb3Thk4TDQg3
    YOkXkb3Thk4TDQg3
    ZZETDCqyh5jOva2T

    • Remove the four 17.5mm T15 screws from the speakers.

    • Remove the five 7.5mm T15 screws from the cover plate.

    • Remove the cover plate with your hands.

  6. SPYDL5NESpVS5ngF
    SPYDL5NESpVS5ngF
    ovFMKqrWZAqXnf4v

    • Disconnect the two speaker connections from the motherboard with your hands. Use your hands to gently pull the plastic piece at the ends of the wires.

    • Be gentle when disconnecting any wired connections. Pulling on the wires can damage them.

  7. oObfLwLbTBBEQIKr
    oObfLwLbTBBEQIKr
    jDH5asdjWKnIbKrj

    • Remove the speakers from the computer, and if needed, separate by disconnecting the wires between them.

    • Be gentle when separating wired connections. Pulling on the wires can damage them.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Zachary Dicks

Member since: 01/10/15

1117 Reputation

One comment

where to get the replacement speaker???????

Clovis Young -