Graco Paint Sprayers 17P189 2017 Pump Hose 288623 Replacement

Written By: Trevor A
  • Comments: 4
Graco Paint Sprayers 17P189 2017 Pump Hose 288623 Replacement

Difficulty

Moderate

Steps

4

Time Required

30 minutes

Introduction

  1. ThNwGq2eP3BypLTH
    ThNwGq2eP3BypLTH
    UxKWRhmQEgqLoIMc

    • Remove 2 bolts holding the cover on

  2. bFKSbCmI3mg6n5LA

    • Remove hose 288623

  3. CsTxZ6StkcSvHjNX
    CsTxZ6StkcSvHjNX
    yGnIvhutOiNBOZMj

    • Connect bottom hose to pump hose without locking it in all the way. Pulling hard you will pull the top portion of the hose through and feed it all the way over to the right locked in place

  4. fySDTaWZeFRCPUTJ

    • With the top hose attached make sure to feed around both ends of the pully and pull bottom hose through and push all the way to the right

    Try it with a new hose

    STEVE -

    from what I can see this is not a replacement tutorial this is a tutorial on how to put the hose back into alignment on the pulley

    JACOB -

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Trevor A

Member since: 16/09/21

1360 Reputation

2 comments

What do i do with the hose plate, throw it away?

JOSEPH -

No, It holds the Hose Coupler in place, not allowing it to wiggle when machine in operation.

MAURICIO -