Geardup RC Ford Mustang GT Car Shell Replacement

Written By: Claudia Robinson
  • Comments: 0
Geardup RC Ford Mustang GT Car Shell Replacement

Difficulty

Easy

Steps

2

Time Required

1 - 5 minutes

Introduction

The shell on the RC Mustang GT is mostly a cosmetic component, giving the car the unique appearance associated with GEAR'D UP's RC cars. The following steps will show how to replace the shell of the car.

  1. FW3LCfdgxBrqEcgb
    FW3LCfdgxBrqEcgb
    VJXClp2aiiOVdemi

    • Flip the car over and remove the four 5mm Phillips #0 screws that hold the shell to the car chassis.

  2. utrySo6CaYeuHiQJ

    • Flip the car over again to its upright position and vertically lift the shell from the car.

    • During re-assembly, make sure the shell is correctly aligned. If it is not aligned correctly, it may rub on the wheels, possibly preventing them from turning.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Claudia Robinson

Member since: 01/02/15

467 Reputation

0 comments