Garmin nüvi 3590 LMT Battery Replacement

Written By: David
  • Comments: 0
Garmin nüvi 3590 LMT Battery Replacement

Difficulty

Very easy

Steps

5

Time Required

20 minutes

Introduction

This guide will serve as a prerequisite for further guides to ensure workbench safety for the Garmin nüvi 3590 LMT.

WARNING: Use caution when dealing with batteries and dispose of properly. DO NOT PUNCTURE.

  1. rYETSPNqrokvGLoM

    • Turn the device off by pressing and holding the power button on the top left of the device.

  2. GUvXgbgPOFHaSUUN

    • Use the plastic opening tool to separate the tabs on the black back cover of the device by leveraging the tool against the frame around the perimeter of the device.

  3. BqjWDE2kGEjd3Qj4

    • Once all of the tabs are popped out, take the back cover off.

    • The back cover is a separate piece from the device.

  4. syfoD1crdbILF4lS
    syfoD1crdbILF4lS
    WhL5bSOT5bEHXOT4

    • Using the plastic spudger, carefully remove the white tab connected to the battery from the device by pulling the tab in the opposite direction from which it is connected.

  5. eMdlKdD1IFYonO3T
    eMdlKdD1IFYonO3T
    OrYvEDIJyUY6gRGn
    ECVNBIxnOAGCVZgZ

    • Use the plastic spudger to lift the battery up and away from the device.

    • Do not puncture or bend the battery. Serious health complications could occur.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

David

Member since: 11/03/15

424 Reputation

0 comments