Introduction

Before you begin disassembling the device, be sure the power is off.

  1. aGpWPKGBXkPR3G4V
    aGpWPKGBXkPR3G4V
    qWoGfE5LLlOwOCX2
    • Wedge a plastic opening tool in between the outer frame and the rear panel assembly.

    • Pry the outer frame off the perimeter of the rear panel assembly.

    • The cover will easily pop off.

  2. FTyabHJuthiOtUXj
    FTyabHJuthiOtUXj
    R6ScWTQqrkhVQkaP
    • Remove the four #00 Phillips screws securing the front case assembly to the rear case assembly.

    • Carefully lift, but do not completely separate, the front case assembly from the rear case assembly.

    • Be extremely cautious when separating both halves, as the rear case assembly is still attached to the front case assembly via a few connectors.

  3. p45vNMvFrD4jelvb
    • Gently pull the battery cable connector from its socket on the motherboard.

    • The second connector can remain attached to the motherboard, but be careful not to break the connector while handling both halves of the device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Andrew Burman

Member since: 19/01/12

1 Reputation

0 comments