Fixing a chair that squeaks

Written By: Samantha Aguilar
  • Comments: 0
Fixing a chair that squeaks

Difficulty

Moderate

Steps

12

Time Required

30 minutes

Introduction

Do you have a chair that squeaks? Do you sit in it expecting to have a good and relaxing time but with your every move it does a loud and gruesome SQUEAK. Tired of your wooden chair squeaking? Well, continue right along and read my fast fix project. This is a guide to repair a wood dining chair that is awfully squeaky. One of the legs has become squeaky due to loose dowels and screws within it. I will be providing you with my method, tools, and photos throughout the repair so that you too can rid your chair of its terrible squeaks.

  1. Nh6yVhZ53rH5TyT5
    Nh6yVhZ53rH5TyT5
    V4ft5XpJHRTCGLHK

    • Examine chair to find source of squeaking. It can be from the legs, back, or the seat.

    • To find the source of squeaking you can flip the chair and place it upside down on the ground and observe how the legs are attached to the seat. You can grab each leg with your hand(s) and move it around to see if you can find the squeak. Another way you can check for squeaks is by sitting in the chair and wiggling to locate the squeak.

  2. nIngvNraRL4gljbV

    • Grab your hex wrench and/or screwdriver.

    • Use the head for the screwdriver that best fits your screws/bolts and the same goes for the allen wrench.

  3. JdMryOpoOmnK2YdB
    JdMryOpoOmnK2YdB
    4xdmhZyhhZ2W6QLj

    • Using the hex wrench and/or screwdriver tighten any loose screws underneath the chair and check again for squeaking.

  4. jSQlEyGhJ2yWAjkR
    jSQlEyGhJ2yWAjkR
    pSdwmYJxQQQo3Fed
    mXGs6xafOafSbFXa

    • If the chair is still squeaking remove all screws from the leg(s) that is/are squeaking.

    • The dowel is now exposed.

    • Once you remove the screws you will be able to freely move the leg and any additional wood attached to it. Removing the additional wood will expose dowels, be sure to note where you removed the wood and position so you can correctly reassemble it later.

  5. LSLV1ZYE2MsYKQJh
    LSLV1ZYE2MsYKQJh
    wqm22BCthhTD6CqR
    IiajIZMsCBJOtoQs

    • The wooden dowels are exposed after removing all the screws.

    • Grab your wood glue.

  6. ex4fKftYebP4xiwj
    ex4fKftYebP4xiwj
    RHT5H1GyOyuIUQYH
    cPXlqTYXBnHk6fBS

    • Apply the wood glue where the dowels are located, be sure to get the glue inside the holes.

    • Try to do this step as clean as you can, it can get very messy and wood glue can ruin wood.

  7. sXdHhQNeYYA6PqxD
    sXdHhQNeYYA6PqxD
    I23ipfACXRwSdFul

    • Place the wood you removed from the chair back to the appropriate regions of the chair.

  8. CtGvZHLLYNxCE3kV
    CtGvZHLLYNxCE3kV
    AdjQZFHTmqR5llTV

    • Once you’ve placed all wood back in their correct positions grab your hex wrench/screwdriver, and cloth.

    • Wet the cloth and and remove any excess glue from the chair.

    • DO NOT let the glue dry as it will ruin your wood.

    • Use the correct head size and allen wrench for your screws/bolts.

  9. RtbZvriJTReyFLhN
    RtbZvriJTReyFLhN
    YlyYGi6ihj6YdIOM

    • Put the screws back into the chair using the screwdriver/hex wrench.

  10. 6hSADu1YEQd4OP3h

    • Grab your clamp(s) for the chair.

  11. Zcqth2mnrkhma6os
    Zcqth2mnrkhma6os
    DmIWXFL2PEmDxnoO
    4cpL2gSvx5NbYb1s

    • Secure the clamp(s) onto the chair and occasionally check for dripping glue.

    • Let the chair sit with clamp(s) on for a minimum of 24 hours.

    • DO NOT use the chair while clamps are attached and glue is wet, the glue will be misplaced and the chair will still squeak.

    • You have now completed the necessary steps to rid the terrible squeaks from your wooden chairs.

    • If you have more wooden chairs that squeak you will have to repeat this procedure.

    • Thank you for reading!

Conclusion

To fix your squeaky chair device, follow these simple instructions.

Author

Samantha Aguilar

Member since: 23/01/20

286 Reputation

0 comments