Epson Perfection V33 Main Housing Removal

Written By: Caius Nocturne
  • Comments: 0
Epson Perfection V33 Main Housing Removal

Difficulty

Easy

Steps

3

Time Required

5 minutes

Introduction

    • Open up the lid to the flatbed scanner.

    • It can help with the next step if you lift it so it bends out flat to the other side.

    • On each side of the open hinge there are two large Phillips screws on either side.

    • Use a Phillips screwdriver to unscrew them and lift them out with tweezers.

    • Be careful and avoid dropping the screws on the scanning glass so you don't scratch it.

    • Gently lift the top casing of the scanner up from the side where you unscrewed the area around the lid hinge, at the corner opposite to where the buttons are located.

    • While holding it up at an angle like that, slide the casing towards the opposite side of the hinge.

    • The top casing can now be gently lifted off.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Caius Nocturne

Member since: 12/07/21

2076 Reputation

0 comments