Enabot EBO SE Wheels Replacement

Written By: Kevin H.
  • Comments: 0
Enabot EBO SE Wheels Replacement

Difficulty

Easy

Steps

5

Time Required

2 minutes

Introduction

We'll take you step-by-step through the process of changing the wheels on your Enabot EBO SE in this tutorial, along with helpful advice to ensure a seamless installation. Wheels are essential to its overall performance and mobility. To guarantee optimum performance, it can eventually become necessary to replace the wheels owing to frequent use or wear and tear.

  1. SosCchgNH3uj4RyT

    • Gently turn the robot upside down.

    • Place the robot on a stable surface to prevent it from rolling or falling.

  2. lbH6WhbIxBq1FlxD
    lbH6WhbIxBq1FlxD
    Zkwk5aWeWHnsPMCa
    ehFtFeoqZJZriEZf

    • Use a flathead 2.5 mm screwdriver to remove the 5.7 mm screw from the wheels.

    • A tool should have been provided in the box for this purpose.

  3. bnVuQfKUKIXNe21s
    bnVuQfKUKIXNe21s
    LtgxdREiK4jj5Pq4

    • Pull the wheel assembly towards you so it comes straight off without resistance.

    • If there is resistance, make sure to apply gentle force when pulling as it can get damaged with too much force.

  4. 4ICNFX6KobZhHH2J
    4ICNFX6KobZhHH2J
    eRdlfOSvsCfOJUvJ

    • Pull on the tire tread perpendicularly to the wheels to remove the tread.

    • The wheel should naturally come off with it for replacement.

  5. sYLHWJiwGD6mLlSj
    sYLHWJiwGD6mLlSj
    tadLxyG6MDdhiuRt

    • Repeat previous step with the wheels on the other side.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Kevin H.

Member since: 15/02/24

656 Reputation

0 comments