Introduction
Tools
-
-
With your fingers, carefully pry off the back plastic casing. Starting at the corners is usually the easiest.
-
-
-
Remove all four screws surrounding the battery with the screwdriver.
-
Carefully remove the battery from the device using the Metal Spudger tool to gently separate the battery by wedging it between the device and the battery.
-
-
-
Remove the two screws that hold the audio jack in place. Carefully lift the audio jack out of the compartment.
-
-
-
Use compressed air or a Q-tip to gently clear out the dirt from the inside of the audio jack. This will help make sure future connections are clear.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.