Element GC-1020 Back Cover Replacement

Written By: Lashaun Noel
  • Comments: 0
Element GC-1020 Back Cover Replacement

Difficulty

Moderate

Steps

2

Time Required

No estimate

Introduction

Prerequisite only guide for Element GC-1020 back cover replacement.

  1. BNHUEhkppHt1nTow

    • Unscrew the four screws (size: 3.175mm) on the left and right side of the Element Electronics GC-1020 device using the PH#0 screwdriver.

  2. UO2RFBnNFqVwXmhh

    • Carefully pull the back of the device (the silver portion) apart from the rest of the device.

    • If you pull back too forcefully the power button would move out of place.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Lashaun Noel

Member since: 25/09/15

591 Reputation

0 comments