Eclipse 180BL LCD Screen Cover Replacement

Written By: Thomas Schwarz
  • Comments: 0
Eclipse 180BL LCD Screen Cover Replacement

Difficulty

Moderate

Steps

2

Time Required

5 minutes

Introduction

The LCD screen cover is protection for the easily damaged LCD display. This screen cover is vital to the life of your device.

  1. Ir5KSPo15sM1ttKb
    Ir5KSPo15sM1ttKb
    P244LdeXH6HP2MuJ
    NQ3AKtnUJeJyYysJ

    • To start, remove the two screws located at the bottom of the device.

    • The two screws can be removed using the PH00 head located in the iFixit Repair ToolKit.

    • Both Screws are 1/8 inch in length.

    • Remove the case, and with the Spudger, apply force to the USB port to remove the inner component.

    • Be careful, as releasing the tension will cause all parts to become loose and separate.

  2. oqV6PpmvJPeHgNSi
    oqV6PpmvJPeHgNSi
    G2e2BjZcnjVFNdRL
    1LC1fKW2uYtvLYHW

    • The LCD screen cover is placed into its slot after all the inner components are replaced.

    • Get the new screen cover, and carefully place in alignment with the outer shell.

    • Be sure that the screen fits perfectly, as dust getting in the screen will cause pixels to die.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Thomas Schwarz

Member since: 07/09/15

499 Reputation

0 comments