Disassembling UPS OVISLINK TRACITE CUBE or CUBO All

Written By: pldestin
  • Comments: 0
Disassembling UPS OVISLINK TRACITE CUBE or CUBO All

Difficulty

Easy

Steps

7

Time Required

No estimate

Introduction

Opening the Ovislink Tracite 800 CUBO UPS to change the battery or it's fuse.

Easy to do when you know how... but no public guide or manual from it's constructor...

First of all... SET THE UPS OFF and UNPLUG IT from main.

  1. EyvuZDBigRKmGcDP
    EyvuZDBigRKmGcDP
    uO1DnVhHACWPNNXj
    jeGMeFPMY1YlpLWK

    • Before you begin, be sure to shut off the UPS and unplug it. You do not want the UPS to kick in while you're performing the procedure.

    • Remove the screws (2) under the device

  2. xUNplGR5J3FOX4Jb
    xUNplGR5J3FOX4Jb
    NnBBKZZlREMFlXSw
    XpU15KAlWYuC2pqc

    • Slide the front pannel up

  3. ZvKs2WcBQbTTC2Tl
    ZvKs2WcBQbTTC2Tl
    YwVknjhAlfmXrW3s
    QctGQ6UpV6A5oDLt

    • Remove left/right clips. And remove the bottom pannel

  4. C3ftvhh14yujtMmv

    • Be careful

  5. swbFOOCGcXRDnZP2
    swbFOOCGcXRDnZP2
    C2hfYYxi2ESu1mpm
    BlIGiDMCnSTgWxhC

    • Unclip the left pannel

  6. 5PgBsRVutYvIpaIK
    5PgBsRVutYvIpaIK
    FZW5vjUfJPnpXVSq
    euMKEvgRDjWIvNX2

    • Unclip the right pannel

  7. VVYfDCOmsMrCTI3k

    • Caution when pluging the rear pannel...

    • -blue for neutral.

    • -yelow/green for earth

    • -brown for phase

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

pldestin

Member since: 20/04/15

128 Reputation

0 comments