Disassembling Canon EOS Rebel XS Back Cover

Written By: Daniel Bussone
  • Comments: 0
Disassembling Canon EOS Rebel XS Back Cover

Difficulty

Moderate

Steps

4

Time Required

No estimate

Introduction

Use this guide to replace a dysfunctional back cover.

  1. Kcgp6pWKiadnk2j4

    • Remove the two 3mm (1/8") black screws from the side cover using a #00 Phillips screwdriver.

  2. yYTsJRNaE32s2tr2

    • On the bottom, remove the 6mm (13/64") screw with the #00 Phillips Screwdriver.

    • Pry up the panel; starting from the front/bottom corner, as indicated.

    • There's a concealed lip, under the opposite edge.

  3. aBXY4aUaOWiGZNw4

    • Remove the three long black screws from the bottom using a #00 Phillips screwdriver.

    • Use tweezers to lift the panel.

  4. Z4fqP2LlsYFVPAoh

    • Once you have detached the back cover, use a pair of tweezers to lightly pull on strap found connecting the back cover to the camera.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Daniel Bussone

Member since: 28/01/11

1251 Reputation

0 comments