Digital Calipers Battery Replacement

Written By: Spencer Day
  • Comments: 1
Digital Calipers Battery Replacement

Difficulty

Easy

Steps

4

Time Required

1 - 2 minutes

Introduction

Use this guide to replace the battery in iFixit digital calipers.

Note: iFixit digital calipers come with two SR44 (also called LR44, AG13, or SG13) button cell batteries.

  1. 63RpDbCMPwIaxcAQ
    63RpDbCMPwIaxcAQ
    2HXDPYVFAKS1cPXD
    JNpOWwJcxP5TnXeS

    • Use the pad of your thumb to slide the battery cover away from the display.

    • Remove the battery cover.

  2. TrVttmuISemTAuMD
    TrVttmuISemTAuMD
    ypHJKA6CujQLl6jx

    • Remove the battery.

  3. 5L2lJ3ErnNiXRhTZ
    5L2lJ3ErnNiXRhTZ
    yHVJbNZiQOGeeBTF
    bV51bSqAwCrfBVwS

    • Insert the new battery at a downward angle into its recess, positive (+) side facing up.

    • A small piece of angled metal secures the battery in its recess.

    • Press down on the battery so it sits flush in the recess.

    • The display should turn on. If it doesn't, even after pressing the on/off button, the battery may be upside down or already dead.

  4. IKTfZMKLpSHVmrXM
    IKTfZMKLpSHVmrXM
    fdZRBuIUlgTxCsfA
    WsLxfeIyPTO2lMP3

    • Press the outer edge of the battery down with the cover and slide the cover into place.

    • If this feels difficult, the battery may not be seated correctly. Reinsert it and try again.

Conclusion

For more information on how to use digital calipers, follow this guide.

Repair didn’t go as planned? Try some basic troubleshooting, or ask our answers community for help.

For other general electronics skills guides, click here.

Author

Spencer Day

Member since: 14/09/22

74534 Reputation

One comment

hi i am looking to replace my battery cover for my vernier ams32 any ideas

Robert Wales -