Dexter UP20 Brushless Grinder Grinding Head

Written By: Slava Korchmar
  • Comments: 0
Dexter UP20 Brushless Grinder Grinding Head

Difficulty

Moderate

Steps

3

Time Required

5 minutes

Introduction

This guide shows you how to replace the grinding head.

  1. Remove the battery from the device.

    • Remove the battery from the device.

    • Remove the internal flange.

  2. Remove the handle. Remove the protective guard.

    • Remove the handle. Remove the protective guard.

  3. Loosen the screws. Remove the grinding head.

    • Loosen the screws. Remove the grinding head.

Conclusion

To reassemble your device, follow the instructions in reverse order.

Author

Slava Korchmar

Member since: 11/12/19

2123 Reputation

0 comments