Introduction
This replacement guide will show you how to replace the HDMI/USB cable on your Dell VRP100 headset. With the right tools, this will be a quick and easy replacement.
Tools
-
-
Remove the black foam padding by peeling away slowly.
-
Remove the front and back padding from the headset by peeling away slowly.
-
-
-
Remove the cover using one of the plastic opening tools, and then carefully pull it from the casing.
-
-
-
Remove the six 5.5mm PH000 screws from the cover by rotating counter-clockwise.
-
Carefully remove the lens and motherboard assembly from the white casing.
-
-
-
Remove the two 5.5mm PH000 screws from the cover by rotating counter-clockwise.
-
Hold the HDMI/USB cable and remove from the connection.
-
To reassemble your device, follow these instructions in reverse order.
6 comments
Hi
Nice breakdown. Would you know where I can purchase a spare cable (I’m in the UK) as I can find nothing online regarding where to buy one.
Thanks
Jason
Me too, looking for a cable replacement.
also looking for replacement cable as mine has twisted up so bad that there is no longer and picture coming through when can i buy the replacement
Parallel structure
Andres Ikaika Elzaurdia -