Introduction
This guide will demonstrate how to separate the Clam Shell from the DeWalt DW938.
-
-
Use a torque bit screw driver to remove the T10 18.3 mm screw on the handle.
-
Use a torque bit screw driver to remove 6 T10 21.5 mm screws on the handle.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
One comment
do you know where I can find a clam shell just like this one?
file:///C:/Users/Tony/Desktop/clam%20shell1.jpg
The 6 larger screws on mine are T15.
Justin Lundberg -