DeWalt DW920 Battery Replacement

Written By: Stephen Rada
  • Comments: 1
DeWalt DW920 Battery Replacement

Difficulty

Very easy

Steps

3

Time Required

5 minutes

Introduction

For this guide you will not need any additional tools. By following the basic steps you should be able to remove the battery so a new functioning one can be installed.

  1. ZxWIfDyT63QUtSML

    • Firmly grip the handle of the drill with one hand and the battery with the other.

  2. ZdMdQYg3UweZwkmn

    • Using the hand holding the battery press the two tabs that are located on the left and right side of the battery where it connects to the drill.

  3. QRnL5lCOHrtAMZtT

    • With the two tabs pushed in pull the battery out of the drill.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Stephen Rada

Member since: 11/03/16

433 Reputation

One comment

Need batteries for DW920 dewalt screwdriver

I have case, charger and screwdriver but batteries are dead and need replacements (2)

Cell 747-294-1342 Chuck P.

Charles Phipps -