DeWalt D28110 Pinion Replacement

Written By: Will Young
  • Comments: 0
DeWalt D28110 Pinion Replacement

Difficulty

Easy

Steps

6

Time Required

10 - 15 minutes

Introduction

In this guide you will take apart the pinion "head" of the grinder to gain access to components in the gear case.

  1. W4Gkk1TRDcGvl2GR

    • Using the T-15 screwdriver, remove the four 22-mm torx screws on the gear case.

    • Unplug the grinder before any disassembly.

  2. 4uXa4r2BwTOBWFkB
    4uXa4r2BwTOBWFkB
    MMLr4h6Gi42oVWYf

    • Pull out the gear case.

  3. dTRVy2TBQ6OHRe5w
    dTRVy2TBQ6OHRe5w
    hqr2WJSkRkqlKZBF

    • Using the T-15 screwdriver, remove the four torx screws.

  4. Xt4aMlqeqQeC1oxP

    • Remove the gear case cover from the gear case.

  5. 3aMWXiHxgTtwmalI
    3aMWXiHxgTtwmalI
    hUficU4NA6uHaMjE
    KV5LYaGwDvlpiqw5

    • Using a 10-mm wrench, remove the hex nut by rotating counter-clockwise.

  6. BRGKYsBLkIGdFqft
    BRGKYsBLkIGdFqft
    Qqd4j26oPCMhynbH

    • Remove the armature assembly from the gear case.

    • Remove the pinion from the armature assembly.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Will Young

Member since: 05/02/15

266 Reputation

0 comments